EMT Practice Test

1. Question Content...

---

Question1: Refer to the Exhibit.

While building an application blueprint, the administrator cannot add a vPostgres database service to the new operating system, as shown in the exhibit.
What is needed to resolve this?

Question2: Which two types of identity stores can be configured for a tenant? (Choose two.)

Question3: What is a possible reason for the Health badge score of a vCenter Server to suddenly drop to 0?

Question4: A user is creating a blueprint and finds that they are only able to create and edit global blueprints.
Why is the user unable to create both global and local blueprints?

Question5: An IP address is provisioned from a vRealize Automation Network Profile static IP range.
What will happen when the workload using the IP address is destroyed?

Question6: Refer to the Exhibit.

During application deployment, the load balancer is not being configured correctly, as shown in the exhibit.
What could be done to resolve the issue?

Question7: An administrator needs to meet a department's temporary requirement for additional testing and development capacity of an unknown size.
Where should the administrator create a reservation for this Business Group within vRealize Automation?

Question8: An administrator powers on a vRealize Automation Multi-Machine Service that includes Machine A and Machine B The application on Machine A does not start correctly and displays the following error message:
Machine B not ready
What step should be taken to resolve this issue?

Question9: What is the most efficient way for an administrator to add multiple endpoints to vRealize Automation?

Question10: An administrator is configuring a DHCP Group within a Private Network Profile. The administrator cannot complete the configuration due to an error.
What is the most likely reason?

Question11: What are two valid usable cloud resources that can be leveraged by vRealize Automation? (Choose two.)

Question12: After registering the vCloud Connector plug-in with vCenter Server, an administrator discovers that the private cloud does not appear in the plug-in interface.
What step could be taken to resolve this issue?

Question13: The ability to perform a stretch deploy of a virtual machine contained in a vApp using the vSphere Client is unavailable. The administrator verifies that the environment is properly licensed and the target virtual machine is powered off.
What should the administrator do to enable the stretch deploy option?

Question14: While creating a vRealize Automation reservation, an administrator finds that the cluster resource information is unavailable.
What is the most probable cause of the issue?

Question15: An administrator creates a vRealize Automation virtual machine blueprint with the following resource parameters:

A user tries to launch a machine based on this blueprint with the following resource parameters:

What is the immediate outcome of this attempt?

Question16: How can an administrator make a commonly used development environment available for end-users to deploy?

Question17: What is the minimum role required to modify the properties and components of an application blueprint?

Question18: Refer to the Exhibit.

The system administrator is required to configure a User Search Base DN for users who reside in the Users OU shown in the exhibit.
Which Base DN meets the stated requirements?

Question19: You have been tasked with customizing the provisioning workflow of a specific blueprint. What object would you need to edit to achieve this?

Question20: An administrator needs to create property definitions in the Property Dictionary. After clicking on Blueprints under the Infrastructure tab, the administrator notices that the Property Dictionary menu isn't visible.
What is the issue?

Question21: An administrator needs to enable a cluster to be used by vRealize Automation. The cluster has the following configuration:

Which change to the cluster must the administrator make?

Question22: An Administrator is configuring vCloud Connector's (vCC) Content Sync. After configuring the vCC Server and vCC Node the vSphere folder is not syncing to the destination folder.
What could be wrong?

Question23: Which two network services are available when NSX for vSphere is integrated with vRealize Automation?
(Choose two.)

Question24: An organization wants to create an action to vMotion a Virtual Machine.
Which two steps would be required in Advanced Service Designer to implement this activity? (Choose two.)

Question25: What command type would you use to add or remove associations between skills and DEMs in the Model Manager?

Question26: Refer to the Exhibit.

An administrator is looking at Recent Events under the Infrastructure tab for successful snapshot creation events as shown in the exhibit.
The administrator has created several snapshots successfully.
Based on the exhibit, why are those events not displayed?

Question27: An administrator is required to use Native Active Directory as your identify source, which tenant supports this configurations?

Question28: The URL for a vRealize Automation server has changed, prompting the need to update Application Services registration. This is done using what process?

Question29: A business group administrator is assigned to build three blueprints each with the same twenty custom properties.
What would be the best approach to avoid mistakes with custom property entry?

Question30: Which three types of Compute Resources can vRealize Automation use to provision machines? (Choose three.)

Question31: An administrator logs into a tenant and sees a blank page displayed with only a Submit button.
What could cause this condition?

Question32: Which three are valid components of a Service Blueprint? (Choose three.)

Question33: An organization needs to track costs across multiple groups. Creating/Editing a Consumer Hierarchy is a function of which module in vRealize Business Standard?

Question34: Once an administrator has added a new property definition to the Properties Dictionary, in which two places can it be used? (Choose two.)

Question35: Which three are required components for a vRealize Business Standard installation? (Choose three.)

Question36: Which three steps are necessary after creating a custom service blueprint to make it available for end user consumption? (Choose three.)

Question37: An administrator needs a single-tenant private cloud that can be connected to an existing on-site vRealize Automation infrastructure.
Which vCloud Air offering should the administrator choose?

Question38: A once active entitlement has been changed to inactive, what are the implications of this change?

Question39: An administrator has installed Application Services for a tenant group of users.
What new role will give the group the least privileges necessary for provisioning applications into the vRealize Automation catalog?

Question40: An administrator logs into the vRealize Automation web console and does not see Reservations menu.
Where should the administrator account be added to see this menu?

Question41: What is required to integrate vRealize Automation with vRealize Orchestrator?

Question42: Which step should an administrator take to avoid conflict on a subnet between vRealize Automation Network Profiles and existing workloads?

Question43: Senior IT leadership wants information to help determine workload placement and tradeoffs between buying new hardware or using a public cloud provider.
What VMware product provides that information?

Question44: An IaaS Administrator is explaining Endpoints to a colleague.
How can the administrator explain why it is not needed to enter credentials every time vRealize Automation collects data from an Endpoint?

Question45: When adding an Active Directory Identity Source, which two fields are required? (Choose two.)

Question46: Which three Advanced Service Endpoint are available for vRealize Automation? (Choose three.)

Question47: What should an administrator do to ensure that virtual machines on a compute resource have a controlled, non-DHCP range of IP addresses?

Question48: Which three data sources are supported for use with vRealize Business Standard? (Choose Three.)

Question49: An administrator is troubleshooting IaaS components in a vRealize Automation deployment.
Which two steps outline the process for generating a log bundle for these components? (Choose two.)

Question50: A vRealize Automation workflow is configured to accept typed user data as input to customize a virtual machine during launch.
Which defined property below would enable this functionality?

Question51: Which mechanism should be used in vRealize Automation to associate host names with a particular department?

Question52: Refer to the Exhibit.

A manager in the administration group cannot access a new application blueprint named Multi- TieredLampStack. Access should be restricted to applications used by the administration group.
An administrator examines the information shown in the exhibit.
What should be done to grant access?

Question53: The vRealize Automation administrator has created a vSphere blueprint. During the entitlement configuration, which action should the administrator configure to allow users to delete machines that have been provisioned from this blueprint?

Question54: Which value should be entered for the default tenant when configuring the SSO settings on the vRealize Automation Appliance?

Question55: Which encapsulation protocol does NSX support when integrated with vRealize Automation?

Question56: Application Services relies on vRealize Automation for which two parts of a typical workflow? (Choose two.)

Question57: Which two Network Profiles could an administrator create to ensure every machine can access the external network and is also accessible from the external network? (Choose two.)

Question58: A business group manager requests an email be sent out when resources in their reservations run low.
Which option best addresses the request?

Question59: A user requests that an approval policy be changed. The administrator tries to edit the approval policy and fails to find a way to edit the policy when logged in with the System Administrator role.
What is a likely cause of this situation?

Question60: A Tenant administrator needs to assign a role to a group to give them the right to create, modify and delete applications in Application Services.
What is the role that will grant the group the minimum required permissions?

Question61: Which three administrator roles can edit system-wide settings? (Choose three.)

Question62: vRealize Automation uses vRealize Orchestrator endpoints to run what sort of workflows?

Question63: An administrator is creating vRealize Automation reservations as initial placeholders for Business Groups.
The administrator has specified Compute Resource, Name, Network Paths, Storage, and Provisioning Group settings to create the reservations.
Which additional setting must be specified to complete the task?

Question64: A reservation policy allows a strict relationship to be established between a blueprint and what other vRealize Automation object?

Question65: An administrator discovers that the same ten custom properties are used for a machine blueprint.
What is the best solution to avoid having to always enter the same ten custom properties for a blueprint?

Question66: What step is required to use the default vRealize Orchestrator instance with vRealize Automation?

Question67: A vRealize Automation user requires the ability to view and update all cost information for a vRealize Business Standard installation.
What is the most restrictive role that provides these permissions?

Question68: An administrator has been tasked with removing a secondary datacenter from vRealize Automation Center. After removing the secondary datacenter from the locations file, the administrator notices that it still appears on the Confirm Machine Request page.
What additional step must the administrator perform to completely remove the secondary datacenter?

Question69: A system administrator has created a new tenant and wants to use native Active Directory as the identity store but the option is not available.
What is the issue?

Question70: An upgrade of IaaS components fails for two servers running Website and Manager services on each server. The administrator started the upgrade on both servers at the same time.
What is a likely cause of the failure?

Question71: What is required for a tenant to manage an item in vRealize Automation that was created by a vRealize Orchestrator workflow?

Question72: The vRealize Automation administrator has created a service named Development, which includes catalog items based on Windows and Linux.
The administrator has created an entitlement named Linux Users and added the Power On and Reset Actions permissions and the Development service.
The Linux users report seeing both Linux and Windows catalog items.
What is required to ensure the Linux users only see Linux catalog items?

Question73: A user has been assigned the vRealize Business Standard Budget Management Controller role.
Which two details can the user view in the Consumption List? (Choose two.)

Question74: While trying to extend blueprint workflows, you notice that the default workflows delivered with vRealize Orchestrator need further customization to meet all the requirements.
Which programming language can be used within vRealize Orchestrator to write customized workflows?

Question75: What would prevent a system administrator from deleting a tenant?

Question76: Refer to the Exhibit.

Three machines have already been created with the Machine Prefix shown in the exhibit.
Based on the exhibit, what will be the name of the next machine?

Question77: Which three roles have the permission to define new catalog items and publish them to the service catalog? (Choose three.)

Question78: An executive has asked for a report showing the number of machines in each business group and the total resources that those machines use.
Which Resource Report can you run to satisfy the request?

Question79: Which two tools would a vRealize Automation administrator use to extend the default installation for the implementation of Anything as a Service (XaaS)? (Choose two.)

Question80: An administrator needs to give another engineer access to create and manage fabric groups and create and manage endpoints, but needs to make sure they do not have access to system event logs.
What role is required?

Question81: Which three are valid infrastructure costs that can be configured by editing Cost Drivers in vRealize Business Standard? (Choose three.)

Question82: An administrator needs to utilize two new vSphere clusters with four Business Groups.
How many vRealize Automation reservations should the administrator create?

Question83: A tenant has requested a custom message in the vRealize Automation console.
What role is required to make this change?

Question84: Your company is moving cloud providers from Amazon EC2 to VMware vCloud Air. The IaaS Administrator is cleaning up the remaining components.
What is a valid component that the IaaS administrator can remove?

Question85: After an upgrade, in what order must vRealize Automation appliances be joined to the cluster?

Question86: The Goal Navigator assists administrators in which two ways? (Choose two.)

Question87: An administrator is trying to create a new Virtual Reservation. The vSphere Endpoint is configured and functioning properly.
What role and group is required in order to utilize a given compute resource when creating the Virtual Reservation?

Question88: To improve provisioning time of Clone workflows, the configured per-agent limit has been increased.
However, many of the workflows now fail.
What action would resolve this?

Question89: An administrator needs to define a Static IP Address Range in vRealize Automation.
Which object is a prerequisite to complete the task?

Question90: An auditor needs a list of all events from the last six months. Company policies do not allow the auditor to login to the system.
How can the administrator give the auditor the events required?

Question91: As part of a capacity planning exercise, a user needs a report of all reservations for all Business Groups within the user's department including the percentage used for machine quota, memory, and storage for powered-on virtual machines.
How should the user collect the data for this report?

Question92: An administrator incorrectly enters password information for the darwin_user account and locks the account.
What procedure can be used to unlock the account?

Question93: Which two fields are required when creating a new property definition in the Property Dictionary? (Choose two.)

Question94: A department has a critical business service that will need Compute Resources of 8 GHz CPU, 20 GB Memory and 310 GB Storage.
How should the administrator configure vRealize Automation to ensure the highest priority for this critical service?

Question95: Which VMware NSX for vSphere components can be created on demand using vRealize Automation?
(Choose two.)

Question96: An administrator needs to account for the daily cost of operating a virtual machine as well as the cost of the software deployed on the virtual machine.
What action should the administrator take in vRealize Automation to provide the needed information?

Question97: Why would you add a text element to a service blueprint?

Question98: Which two administrator types will be set up during the configuration of a new tenant? (Choose two.)

Question99: What role does a user need in order to request and manage machines on behalf of other users?

Question100: Which two components must be manually removed in both a minimal and a distributed vRealize Automation deployment when rolling back a failed installation? (Choose two.)